Eschenbach-optik Quicklook Zoom Bedienungsanleitung

QUICKLOOK User Manual Please read the “Important Instructions for Use” overleaf

10 Adjusting the backlight The backlight brightness can be adjusted to suit the lighting conditions you are working in. Repeated quick clicks of the

11 battery icon changes colour depending on the remaining capacity and will display in blue if the unit is being recharged. Using the Menu

12 Use Zoom-up and Zoom-down to navigate through the menu choices and press Mode to accept the choice. Press Freeze to cancel a choice

13 The Colour Mode Menu: Brightness – Use the Zoom-up and Zoom-down buttons to adjust the image brightness. Press Mode to accept the new setting.

14 The Reading Mode Menu: Colour selection – Here you can change the semi-colours used in the reading modes. The icon on the right will

15 The Advanced Settings Menu: Battery display – You can display the level of power remaining in the battery in the upper left of the screen. Sound

16 Note about Auto-off and persistence By default the Auto-off is enabled, i.e. the unit will turn itself off after 5 minutes of non-use.

17 Maintenance Dirt and finger marks on the screen should be cleaned with the lens cleaning cloth provided. If Quicklook becomes dirty it can

18 Warranty The Quicklook Zoom has been fully tested prior to shipping and should provide reliable service. Ash Technologies warrants the equipment

19 SPECIFICATIONS Size: 168mm x 96mm x 28mm (6½” x 3¾” x 1”) Weight: 250g (8.8oz) Power consumption: 15W operating, 35W recharging and operating. V

2 Important Instructions for Use • Use only the charger provided. Use of another charger could result in irreparable damage to Quicklook

20 © Ash Technologies Limited 2007 Ash Technologies Ltd. B5, M7 Business Park, Naas, Ireland. Made in Ireland  +353-45-88 22

3 Introduction Congratulations on the purchase of your new Quicklook Zoom magnifier. Quicklook has been designed for simple and intuitive use a

4 charge it for three hours or until the red charge indicator is extinguished. Plug the power supply into a wall socket and insert the connector

5 Charge input and indicator Wrist strap loop Camera Freeze / Brightness button Mode button Zoom down button Pic of the mouse on the ha

6 Operation The Quicklook Zoom is powered on by rotating the camera to either of its operating positions. It is powered off by rotating the camera

7 Changing image mode Pressing the Mode button (refer to the diagram on page 5) on the side of the unit will cycle through the five image mode

8 Freezing the image To freeze the image, simply press and hold the Freeze button on the side of the unit for about a second (refer to the diagram on

9 Writing When you wish to write with the Quicklook Zoom, rotate the camera out fully to its second click position. While looking at the display, f