QUICKLOOK User Manual Please read the “Important Instructions for Use” overleaf
10 Turning off the camera lights If you wish to look at a backlit display (on a mobile phone or computer display for instance), the camera l
11 Battery Level At start-up, the battery level is displayed in the corner of the screen for 10 seconds. You can choose to display it constan
12 and the Reading Mode Menu contains these options: Use Zoom-up and Zoom-down to navigate through the menu choices and press Mode to accept t
13 The Colour Mode Menu: Backlight - Use the Zoom-up and Zoom-down buttons to adjust the brightness of the display. Press Mode to accept the ne
14 Exit – Exit the menu. The Reading Mode Menu: Backlight - Use the Zoom-up and Zoom-down buttons to adjust the brightness of the displ
15 modes you use are available. If you only require the black and white reading modes select the first icon; choosing the last icon will allow only
16 The Info screen will display the revision of the software within the unit. Factory Defaults – will return the unit to its original factory set
17 Maintenance Dirt and finger marks on the screen should be cleaned with the lens cleaning cloth provided. If Quicklook becomes dirty it can be cle
18 Warranty The Quicklook Focus has been fully tested prior to shipping and should provide reliable service. Ash Technologies warrants the
19 SPECIFICATIONS Size: 168mm x 96mm x 28mm (6½” x 3¾” x 1”) Weight: 250g (8.8oz) Power consumption: 15W operating, 35W recharging and operating. V
2 Important Instructions for Use • Use only the charger provided. Use of another charger could result in irreparable damage to Quicklook Fo
20 © Ash Technologies Limited 2008 Ash Technologies Ltd. B5, M7 Business Park, Naas, Ireland. Made in Ireland +353-45-88 22
3 Introduction Congratulations on the purchase of your new Quicklook Focus magnifier. Quicklook has been designed for simple and intuitive use
4 that you charge it for three hours before use. Plug the power supply into a wall socket and insert the connector into Quicklook as shown in the d
5 Operation The Quicklook Focus is powered on by rotating the camera to either of its operating positions. It is powered off by Charge input
6 rotating the camera back to the closed position. Focussing The Quicklook Focus has a push-to-focus feature that must be used to ob
7 area of interest. In this respect Quicklook Focus differs from a magnifying glass in that the image you see does not correspond to the area
8 Note that all original colour is removed from the image in the enhanced modes. The colour options used in the semi-colour modes can be s
9 Writing When you wish to write with the Quicklook Focus, rotate the camera out fully to its second click position. While looking at the dis
Kommentare zu diesen Handbüchern